Sun Power RV is your authorized dealer representative for Go Power! mobile solar power systems.
not sure what to purchase?
Follow this easy 3-step process for adding sun power to your RV
ASSUMPTIONS FOR STEPS 1 – 3.
Your RV is not plugged into electricity,
Your refrigerator is running on propane not electricity,
You will require a generator to continuously power the air conditioner. See FAQ.
STEP 1: INSTALL SOLAR POWER
Please don’t get bogged down calculating how much solar you will need. With the correct layout you can always add additional solar panels to the RV roof. If roof space is limited or your RV is in partial shade you can add a PORTABLE panel that can be placed in the sun. If all you need to run are DC appliances such as lights, fans, USB charger for phones, water pump, and the DC electronic ignition for the furnace, stove, water heater, and propane fridge any of the following panels will work. If you also need to run coffee makers, TVs, computers, microwaves and other AC power appliances you will need at least two to three of the following panels:
ROOF MOUNTED SOLAR PANELS like our Overlander-170 Watt Solar Panel Kit (best value, 25 year power output warranty, and expandable to 510 watts)
PORTABLE 80 and 120 Watt Folding and Portable Solar Panel Kit (great for pop-up trailers, tear-drop trailers, Chalet trailers, parking in the shade and requires no installation)
SOLAR FLEX 100 Watt Solar Panel Kit (great for curved surfaces, marine environments, and streamlined applications, two more 100 watt panels for a total of 300 watts can be added to the same system)
STEP 2: UPGRADE AND ADD BATTERIES
If you are just using DC power (no inverter) and you already have 2 existing batteries that are fairly new, the best plan is to install the solar and wait until your existing batteries won’t hold a charge anymore. The solar that has been installed and the PWM charge controller will insure you get all the life left in the batteries. There are many types and sizes of batteries. RVs require heavy-duty deep cycle RV/Marine batteries. Cheap batteries will not last very long and will have to be replaced. Batteries should always be of the same type and upgraded all at once. Adding two new batteries to two old batteries will result in the new batteries holding the same charge as the old ones. Sun Power RV is an authorized representative for East Penn Deka Batteries. We offer two choices both of the same size and manageable weight:
MARINE MASTER DC27 Heavy-Duty Deep Cycle Marine and RV Battery (flooded lead-acid battery that delivers excellent performance when properly maintained)
INTIMIDATOR 8A27M Heavy-Duty Deep Cycle Marine and RV Battery (AGM battery that delivers good performance and does not require maintenance)
Typically, the solar panels will be installed first, then the batteries will be specified and purchased locally for installation on the following day.
STEP 3: INSTALL AN INVERTER
The last step is installation of a pure sine wave inverter. An Inverter draws DC current from the batteries and converts it to AC electricity that is identical to what the grid would provide. Having an inverter will allow you to operate all the appliances on your RV.
The GP-ISW-1500 Watt Pure Sine Wave Inverter is great for operation of small kitchen appliances, HDTV, computer, and charging up battery powered tools.
The GP-ISW-2000 Watt Pure Sine Wave Inverter is best for operation of a microwave, hair dryer, most kitchen appliances, HDTV, computer, and charging up battery powered tools..
A minimum of two solar panels are recommended. Either two 170 watt Overlander panels or one 170 watt Overlander and one 120 watt Portable panel.
A minimum of two (2) heavy-duty, deep-cycle, RV-Marine batteries are recommended for operation of an inverter. For the GP-ISW-2000 Watt Inverter, four (4) batteries are recommended.